The wing vestibule accessory will enhance your awning's leisure area by providing additional shade, and protection from wind and rain. It attaches underneath the front of the awning and extends out to the ground.
Two side wings provide additional cover on the sides. It creates a nice space to store gear, put some chairs, or keep a pet. It also adds privacy if the front windows are open. Made with canvas (the old model was polyester, denier cloth).
It also adds privacy if the front windows are open. Made with the same cotton canvas as our tents. Fits all Kodiak Canvas 10x14 Flex-bow tents. Note: Depending on your tent, you may be required to add two 3/8 inch grommets* to your awning for optimal fit. The wing vestibule does not fully enclose the awning area. There will be openings on both sides.
Weight: 9.5 lbs. L: 33.5 W: 6 H: 6.5 inches Cu. ft. .8 Dimensions: (Individual shipping carton)
In order to properly install the wing vestibule, you must first ensure that your Flex-bow tent has the required grommets on the end of the awning flap. You will need five grommets as illustrated in figure 1 below. The grommets are represented by black circles and numbered 1-5. Depending on when your tent was made, and the specific model, you may be required to add two or three additional 3/8 inch grommets.
If you do not have the required grommets kits a do-it-yourself kit can be found at a local hardware store such as Home Depot or Lowes. Here is the kit we recommend: grommets: https://www.homedepot.com/p/General-Tools-Grommet-Kit-with-12-Grommets-81264/204763455
Grommets 3 and 4 should be placed 4 inches from the front edge of the awning as shown below. Grommet 5 shouldbe in the center of the awning on the same horizontal plane as grommets 1 and 2.
Assembly of 1604 is Very Simple1) Assemble the tent first. Tie the end of a guy rope onto each of the grommet holes 1, 2, and 5 (as numberedin figure 1). Note that two guy ropes are included with the tent. An additional guy rope is included with thiswing vestibule accessory.2) Join the awning ridge pole. Loosen the thumbscrew and lengthen the pole to the width of the awning. Placethe awning ridge pole across the awning uprights (included with the tent). The posts at the top of theawning upright poles will go through the holes at the ends of the awning ridge pole. Face the thumbscrewdown.3) Insert the posts on the awning upright poles through their respective grommets at the top of the wingvestibule.4) Now insert the posts on the awning upright poles through grommets 3 and 4 of the tent awning flap.5) Expand the awning ridge pole until it is taut and tighten the thumbscrew finger tight.6) Position the 1601 wing vestibule so the bottom edge is flush to the ground and taut. Secure with stakes.7) Secure the guy ropes with stakes. Adjust so they are taut.8) Secure the top of the wing vestibule to the awning ridge pole with the Velcro-like strips.
Select a row below to filter reviews.
4.6
This product has 30-day returns: Simply hang on to the original packaging and contact us within 30 days of receipt if you are not satisfied with this product. We are that confident you will love this product! If something is damaged or defective we will get it replaced at no cost. Our Kodiak tents have an extremely low return rate as customers love these tents. The reviews speak for themselves. Please contact us before purchasing if you are unsure whether this product is right for you by calling us toll-free at 866-308-5484 or via email at [email protected] Please note that we are happy to waive any restocking fee if the item is unused and in the original packaging.